Технические характеристики
| Параметр | Информация о продукте |
|---|---|
| Модель | FIGO C / Double X / M / XZ / X / BOMB |
| Формованные профили | YOUTH40 / YOUTH20 |
| Показанные семейства полимеров | PDO / PCL |
Модели и конфигурации
| Категория поставщика | Модель | Игла | Длина нити | USP |
|---|---|---|---|---|
| Нос | FIGO C | 19G × 38 mm | 40 mm | 2 |
| Нос | FIGO C | 19G × 60 mm | 80 mm | 2 |
| Нос | FIGO Double X | 19G × 38 mm | 40 mm | 2 |
| Нос | FIGO Double X | 19G × 60 mm | 80 mm | 2 |
| Подглазничная область | FIGO M | 30G × 38 mm | 50 mm | 7-0 |
| Подглазничная область | FIGO Double X | 19G × 60 mm | 210 mm | 2 |
| Брови / лоб | FIGO XZ | 21G × 80 mm | 290 mm | 2-0 |
| Брови / лоб | FIGO XZ | 23G × 60 mm | 190 mm | 3-0 |
| Брови / лоб | FIGO X | 21G × 80 mm | 150 mm | 2-0 |
| Подподбородочная область | FIGO X, две иглы | 19G × 110 mm | 420 mm | 2 |
| Подподбородочная область | FIGO X, одна игла | 18G × 100 mm | 170 mm | 3 |
| Кожа головы | FIGO M | 30G × 25 mm | 30 mm | 7-0 |
| Носогубная область | FIGO BOMB | 21G × 38 mm | 50 mm | 5-0 × 9 |
| Носогубная область | FIGO BOMB | 21G × 60 mm | 70 mm | 5-0 × 9 |
Формованные профили YOUTH
Каталог показывает семейства PDO/PCL и указывает нить420 mm для YOUTH40. Длина YOUTH20 не указана. Полимер и точную модель выбирают вместе; показания и совместимость определяют по инструкции производителя.
ODM и документация
Предоставленный портфель описывает ODM-процесс: выбор моделей; адаптация конфигурации, этикеток и упаковки; подготовка технических документов; проверка образцов, согласований и условий заказа.
В исходном портфеле MYTHCO 2024 показаны CE, ISO 13485 и GMP. Применимость CE зависит от устройства/модели; ISO 13485 относится к системе менеджмента качества производителя, GMP — к контролю производственного качества.
Полные исходные сведения на английском
Ниже сохранён полный английский текст продуктового справочника. Локализованные обзор и таблицы выше представляют собой структурированную адаптацию; PDF остаётся оригинальным документом производителя/источника.
The FIGO thread-system collection brings together FIGO C, Double X, M, XZ, X and BOMB models, alongside YOUTH 40 and YOUTH 20 molding profiles. The catalogue organizes reference configurations by nose, infraorbital, brow and forehead, double-chin, scalp and nasolabial categories.
Thread portfolio overview
The tables reproduce the supplier catalogue categories and reference configurations for technical selection. Each configuration retains its listed gauge, needle reference, thread length and USP designation.
The molding-profile page illustrates PDO / PCL families. The brochure specifies that the polymer and exact model are to be confirmed together when selecting the product.
Nose references: FIGO C and FIGO Double X
FIGO C is listed in two configurations. The catalogue states that FIGO Double X has the same two source-listed configurations for this category.
| Model | Needle reference | Thread length | USP |
|---|---|---|---|
| FIGO C | 19G × 38 mm | 40 mm | 2 |
| FIGO C | 19G × 60 mm | 80 mm | 2 |
| FIGO Double X | 19G × 38 mm | 40 mm | 2 |
| FIGO Double X | 19G × 60 mm | 80 mm | 2 |
Infraorbital references: FIGO M and FIGO Double X
| Model | Needle reference | Thread length | USP |
|---|---|---|---|
| FIGO M | 30G × 38 mm | 50 mm | 7-0 |
| FIGO Double X | 19G × 60 mm | 210 mm | 2 |
YOUTH series: molding profiles
YOUTH 40 and YOUTH 20 are presented as molding reference platforms in PDO / PCL families. The source specifies a 420 mm thread length for YOUTH 40.
The original YOUTH illustration states that YOUTHread is supplied to participants who have attended the manufacturer’s training course or to licensed medical practitioners.
| Model | Profile | Thread length stated in the source |
|---|---|---|
| YOUTH 40 | Molding profile; PDO / PCL family illustration | 420 mm |
| YOUTH 20 | Molding reference platform; PDO / PCL family illustration | Not stated in the supplied catalogue |
Brow and forehead references: FIGO XZ and FIGO X
| Model | Needle reference | Thread length | USP |
|---|---|---|---|
| FIGO XZ | 21G × 80 mm | 290 mm | 2-0 |
| FIGO XZ | 23G × 60 mm | 190 mm | 3-0 |
| FIGO X | 21G × 80 mm | 150 mm | 2-0 |
Double-chin references: FIGO X
| Model / format | Needle reference | Thread length | USP |
|---|---|---|---|
| FIGO X / Double-needle | 19G × 110 mm | 420 mm | 2 |
| FIGO X / Single | 18G × 100 mm | 170 mm | 3 |
Scalp reference: FIGO M
| Model | Needle reference | Thread length | USP |
|---|---|---|---|
| FIGO M | 30G × 25 mm | 30 mm | 7-0 |
Nasolabial references: FIGO BOMB
The source lists two FIGO BOMB configurations and prints the USP notation as 5-0 × 9.
| Model | Needle reference | Thread length | USP source notation |
|---|---|---|---|
| FIGO BOMB | 21G × 38 mm | 50 mm | 5-0 × 9 |
| FIGO BOMB | 21G × 60 mm | 70 mm | 5-0 × 9 |
Professional documentation
The area names are the supplier’s technical reference categories. Exact indications, needle compatibility and clinical instructions follow the approved manufacturer IFU.
ODM configuration and branding
ODM support is available for product configuration, branding and packaging. AB LIFE GLOBAL presents a four-step process, from selecting reference models to reviewing samples and order conditions.
| Step | Focus | Details |
|---|---|---|
| 01 / Select | Reference models and desired specifications | Choose the product family and reference configurations for the intended portfolio. |
| 02 / Customize | Configurations, labels and packaging | Define the configuration, label and packaging requirements. |
| 03 / Document | Technical files and applicable credentials | Prepare the technical documentation and applicable credential information. |
| 04 / Review | Sampling, approval and order conditions | Review samples, approvals and order conditions. |
Manufacturer-source portfolio credentials
The 2024 MYTHCO source portfolio displays CE, ISO 13485 and GMP marks. The brochure presents these as manufacturer-supplied portfolio credentials, with CE applicability determined by the particular device and model.
| Mark displayed in the source portfolio | Scope described in the brochure |
|---|---|
| CE | Device- and model-specific applicability. |
| ISO 13485 | Manufacturer quality management system. |
| GMP | Manufacturing quality controls. |
Профессиональный запрос
Укажите компанию, страну назначения, модель и количество. Откроется почтовая программа; запрос не отправляется и не сохраняется автоматически.
alexmoon@ictmedicalco.com ↗